rtmap:Entry

An RPM route-map entry.

Telemetry Sensor Path(s)

Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
action rtflt:Action
(scalar:Enum8)
Action SELECTION:
0 - deny
1 - permit
DEFAULT: permit
descr pol:Descr
descr
RANGE: [0 , 90]
dropOnFailV4 rtmap:AdminSt
(scalar:Enum8)
Drop On Fail V4 for v4 nexthop SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
dropOnFailV6 rtmap:AdminSt
(scalar:Enum8)
Drop On Fail V6 for v6 nexthop SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
forceOrderV4 rtmap:AdminSt
(scalar:Enum8)
Force Order V4 SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
forceOrderV6 rtmap:AdminSt
(scalar:Enum8)
Force Order V6 SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
loadShareV4 rtmap:AdminSt
(scalar:Enum8)
Load Sharing V4 SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
loadShareV6 rtmap:AdminSt
(scalar:Enum8)
Load Sharing V6 SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
order rtflt:Order
(scalar:Uint32)
Order
RANGE: [0 , 65535]
setDefaultNhV4 rtmap:AdminSt
(scalar:Enum8)
Default V4 Next-hop Address SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
setDefaultNhV6 rtmap:AdminSt
(scalar:Enum8)
Default V6 Next-hop Address SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
setVrfV4 rtmap:AdminSt
(scalar:Enum8)
Enable vrf based set ipv4 next-hop resolution SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
setVrfV6 rtmap:AdminSt
(scalar:Enum8)
Enable vrf based set ipv6 next-hop resolution SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
verifyAvailabilityV4 rtmap:AdminSt
(scalar:Enum8)
Next Hop with V4 Verify Availability SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
verifyAvailabilityV6 rtmap:AdminSt
(scalar:Enum8)
Next Hop with V6 Verify Availability SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled

Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
configError rtmap:ConfigErr
(string:Basic)
config Error associated with this MO A sequence of characters

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)
The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced